Sign on to the web management interface of the CMC. Click on Server Overview on the left hand side menu, then click on the Setup tab in the top center of the screen.
Once the Setup screen loads, make sure you are under the iDRAC tab. Then scroll down until you fine the appropriate server/slot.
Check the box next to Enable LAN, then check the box next to Enable IPv4, then specify the IP address, subnet mask and gateway for the iDRAC of this server, in the fields below. Once done, click on the Apply iDRAC Network Settings button in the lower right.
You’ll be prompted to confirm you want to commit these changes.
Once completed you’ll see the Operation Successful message pop up.
To verify whether you can access the Remote Console for this server, select the server from the Server Overview menu, then click on the Launch Remote Console button.
You should now see the Console of your blade server.